top of page
  • Writer's pictureSafer Highways

Specialist lifting company fined after two workers fell from a crane


A specialist heavy lifting company has been fined after two men fell from height during the assembly of a crane.


Two employees of Osprey Heavy Lift Limited fell as a result of a partial collapse of a platform on a crane at the Port of Blyth, Northumberland, on 19 January 2021.


The platform was being installed using four lifting chains, each had a hook and safety clasp. The hooks were looped over metal lugs on the platform in order to lift it into position. The workers removed the two lifting chains nearest the crane structure and moved along the platform to attach the other side to the crane pendants.


At this point, the two remaining lifting chains came off the lugs and one side of the platform fell to the ground.


Despite both men using safety equipment, they both fell from the platform. One operative fell about four metres to the ground below causing serious injuries, including fractures to ribs, right wrist, and eye socket.


Failed to properly plan

The Health and Safety Executive (HSE) found that Osprey Heavy Lift Limited failed to properly plan the lift and therefore unsuitable lifting accessories were used.


Suitable anchor points for operatives using fall arrest equipment were not identified and there was no consideration of fall distances. Additionally, they failed to provide appropriate instructions and information for work at height and lifting operations.


At South Tyneside Magistrates’ Court on November 7, Osprey Heavy Lift Ltd pleaded guilty of breaching Section 2(1) of the Health and Safety at Work Act 1974. The company was fined £24,000 and ordered to pay costs of £9,136.


After the hearing, HSE Inspector, Clare Maltby said: “Companies who undertake crane assembly work must properly plan lifting activities and work at height, making certain the equipment selected is suitable for the task.


“All organisations undertaking lifting and work at height must ensure work is properly planned, and the correct equipment is selected. Workers should be provided with adequate health and safety information and instructions.”

23 views0 comments

Recent Blog Posts

NEWS AND UPDATES

bottom of page